Since it is essential to the safe passage of the object, then everyone from the beginning of the packaging convenient and fast also need to do, each step of the key links and program design, all to ensure its safety performance and sealing in the water cylinder, the following is some of the appearance requirements for the production of medicinal glass bottles.
Appearance requirements for medicinal glass bottles
1, unclean things can not have rust, oil, water can not wipe down the air pollution, the bottle can not have paper, insects, hair, broken glass, metal composite materials, a lot of dust and other unclean things.
2, bottle cap without holes, loan holes, cracks, damage, burrs; The weak spot has no obvious skew or movement, which endangers the bottle and the compatibility.
3, the pipe thread must be smooth and flat, invisible change, lack, convex and concave uneven.
4, the locking line can not have obvious protrude, double closing line move and sharp burrs harm the safety factor and mutual compatibility.
5, seat posture bottle bottom no concave deformation and harm co-integration test.
6, the thickness of the bottle body is even in the acceptance range, the thickness is not less than 1.5mm. 4.1.7 All parts of the bottle need not have cracks, gaps and damage.
8, the main visual surface of different color points allows Φ≤0.5mm I or 2 non-gathering places, but does not harm the LOGO and plate; The non-main viewing surface allows 2 or 3 non-gathering places of ≤0.5mm but does not affect the plate.
9, the main view surface of the bubble allows 1 or 2 bubbles with Φ≤0.5mm, but does not harm the LOGO and plate; The non-main view surface allows less than 3 bubbles with Φ≤1mm and does not harm the plate; But no burst bubble is allowed.
10. The main view surface of the sandhole allows I or 2 sandholes with Φ≤0.5mm, but does not shadow the LOGO and plate; The non-main view surface allows three holes with Φ≤1mm and does not affect the plate.
11, the surface size of the sand requirements, appropriate thickness, 礞 sand position generally does not rise to the bottom of the pipe thread, higher than the weak point and the bottle body joint, the back of the bottle is not allowed to have bright spots, the side more than 0.8mm of the 5 bright spots, the bottom does not exceed 1.0mm of the 5 bright spots.
Of course, it is easy to better ensure the use of medicinal glass bottles and its efficacy, so we do a good job of its appearance at the time of production and manufacturing.