The key element in the production and processing of glass bottles is the glass bottle mold. The mold is made by lathe, but if one understands the difficulty of the mold, it is estimated that few people really grasp the process.
First is the overall planning drawings: sample glass bottles or specifications to the planning staff overall planning drawings of all equipment;
The second step is turning the sand process blanks: turning out the blanks for each component according to the drawings;
the third step is drilling with CNC machine lathe: the initial mold and blanks are drilled into the plan based on the CNC machine lathe;
the fourth step is to turn everything with the same time constituent parts: all the production lines, all the mounts and all the lathes have been running for a long time, and they have their respective hard work duty authority; there are dry primary moulds, the tail of the moulds is the bottom of the moulds, the individual road is completed, followed by the second completed; At the tail of the mold bottle, there are dry bored head, boring and tasteless Brinell funnel, wine glass bottle details boring and tasteless extractor and boring and tasteless mold mouth, followed by some people will type core or set pin and FRP cooling tower boring and tasteless;
The fifth step carving: after the second step molding carried out, put into the product modeling design or the original digital model into the carving lathe, and according to the overall planning of the operating procedures automatically type 99 work on to the carving, thus saving time and charm, no mistakes were made.
The sixth step is the polishing process: polishing the molds and final molds carved from the delicate carving with water-grit sandpaper;
The seventh step is assembly: fusing together the components assembled in each automatic production line, followed by the slack parts constituting the product yield parts;
The eighth step is punching: opening holes or exhaust pipes for all made parts / established according to the drawings.