Quality inspection of raw oil glass bottles

Many of the original OARS, raw oil body glass packaging bottles in the whole process of customer use, there are more or less difficulties, in fact, such difficulties are important to the manufacturer, the quality of the glass bottle inspection. Reason: Important in the production process, quality inspection improper reason.
1. Factory inspection
For manufacturers specializing in the production and processing of oral dental liquid glass bottles, most of them are based on the abrasive tools provided by customers, or according to the construction drawings, the production and manufacturing of new abrasive tools for glass bottles, which will hurt the key specifications and models of abrasive tools, and try to expand the emotional communication and consultation of customers, so as to achieve the consensus of the modification of key specifications and models. All imported abrasive tools are imported to the manufacturer's die, initial die, mold matching, according to the construction drawings or customers.
2. Original paddle, raw oil glass bottle
① The first inspection is the first 10-30 kinds of goods manufactured before and after the grinding tool is put on the zero line. Each abrasive tool 2-3 kinds of goods to detect the specifications of the goods.
When the glass bottle comes out from the annealing line, the quality should be limited to 2-3 goods on each molding product, and multi-directional testing should be carried out according to the construction drawings. The top priority should be to accurately measure the capacity, accurately measure the net weight of raw materials, accurately measure the diameter of the mouth, when necessary, drinking water bottles, glass bottles with customer covers, and test whether they can be blocked. Air pressure, air pressure, ph test.
3. Treatment test
① The inside of the abrasive is always unchanged, and 2 pieces of abrasive are obtained every 2 hours for capacity and net weight detection, and the diameter of the specification model is tested as far as possible to prevent the leakage of rigid waterproof casing due to the abrasive oil trace.
② In the entire process of production, due to the reason of abrasives, new abrasives can be disassembled, so the production line as soon as possible to notify the product quality inspection production line. Product quality inspection production line, as far as possible to the new mold manufacturing glass bottles for the first time testing and production process testing, to avoid product quality problems caused by the failure of product quality inspection after the removal of abrasive tools.