There's no reason why glass wine bottles are irreplaceable wine packaging
Due to its own texture and structure, glass wine bottles have small gaps that are difficult for our naked eyes to distinguish, which plays a very important role in the preservation of wine. With the development of technology, Kang'anfu wine bottle adopts high-tech anti-ceramic treatment, so that the glass wine bottle inherits the advantages of ceramic wine bottles, and at the same time has the beauty of glass wine bottles. Make the two get the perfect combination.
Glass wine bottles have a variety of colors, and the transparent characteristics of glass wine bottles, coupled with different colors, can be selected from light to dark colors. This transparent feature satisfies the need for light in the process of wine preservation, and the winery can choose different color wine bottles according to the variety of wine. The transparent wine bottle with spray frosting, electroplating, baking varnish and other effects makes it look more textured, which is also what the winery pursues.
For a long time, glass wine bottles have been the first choice for wine packaging, which has also formed people's inherent consumption habits. This consumption habit is subtle and will not change in the short term.
The pre-treatment section of glass bottle spraying includes pre-off, main off, surface conditioning, etc.
The glass wine bottle spraying production line generally consists of a spray booth, a suspension chain and an oven. There is also the front water treatment of glass bottles. Glass bottles need to pay special attention to the problem of sewage discharge. As for the quality of glass bottle spraying, it is related to water treatment, surface cleaning of workpieces, electrical conductivity of hooks, size of air volume, amount of powder sprayed, and the level of operators. It is recommended to try the following methods:
1. Pre-processing section
The pre-treatment section of glass bottle spraying includes pre-stripping, main stripping, surface adjustment, etc. If it is in the north, the temperature of the main stripping part should not be too low, and heat preservation is required. Otherwise, the treatment effect will not be ideal;
2. Preheating section
After the pretreatment, it will enter the preheating section, which generally takes 8 to 10 minutes. It is best to make the sprayed workpiece have a certain amount of residual heat when the glass bottle reaches the powder spraying room, so as to increase the adhesion of the powder;
3. Glass bottle soot blowing purification section
If the process requirements of the sprayed workpiece are relatively high, this section is essential, otherwise, if there is a lot of dust adsorbed on the workpiece, the surface of the processed workpiece will have many particles, which will reduce the quality;