How to reduce unnecessary broken losses of glass wine bottles

How to reduce unnecessary broken losses of glass wine bottles
How to reduce unnecessary broken losses of glass wine bottles is mainly to strengthen the protection of glass bottles. Because glass wine bottles are a kind of fragile products, it is inevitable that there will be bumps, cracks and broken phenomena in one way or another during transportation. So, how do we reduce or avoid these losses?
Strengthening the protection of glass wine bottles is a very effective way to reduce breakage losses. First of all, it is necessary to carry out a comprehensive packaging of the glass wine bottle, put the glass wine bottle into a good quality carton, and must choose a high quality carton. The number of liquor bottles placed in the carton should not be too much, let alone the phenomenon that the glass wine bottle squeezes the carton. Secondly, some soft things such as foam should be placed at the bottom of the glass wine bottle packaging box, and the glass wine bottle will bump up and down on the poor road and uneven road sections, causing the wine bottle to collide. Again, enhance the driver's awareness of protection. Ask the car driver to slow down as much as possible, and when encountering a poor road section, slow down and pass slowly.

What method is used to deal with cracks in liquor bottles
What will happen to the main cracks formed by the raw materials, and how to deal with them and how to prevent them. The first point of doing this is to have a certain selection of raw materials for liquor glass bottles. Such a choice is that the raw materials without impurities can completely avoid the bursting of the wine bottle. Quartz sand is the main material for making liquor bottles. How can there be Bolie after melting? Another point is that the temperature control is not good.
The temperature is generally controlled at what level is considered the most suitable, and there will be a process from high temperature to low temperature on the production line. For the glass bottle assembly line, it can be said that the temperature will burst from 6000 degrees directly to 100 degrees. If there is no such temperature gap, such a thing will not happen.