At present, there are many types of sauce on the market, that almost can meet the requirements of customers, packaging a good sauce, naturally must be a suitable glass bottle type, below give you a brief introduction to the production and manufacturing of pickle bottles, to master the corresponding workflow and production and processing technology, to share some relevant content related to the production and processing of pickle bottles.
Pickles bottle production and processing common problems
1. Avoid cracks, cracks are the shortcomings of glass bottles. It may be very thin and frequently produced body parts are bottle stoppers, shortboards, and shoulders, some of which can only be found in refracted light, and sometimes the bottle body and the bottom of the bottle are often cracked.
2. Avoid uneven thickness, which also refers to the uneven laminated glass on the glass bottle. Generally due to the uneven temperature of laminated glass drops, the viscosity of the part with high temperature is small, and it is simple to blow thin. The part with low temperature has high friction resistance and is thicker. The solid model of the pickle bottle has uneven temperature, and the laminated glass on the high-temperature side is cooled slowly and simply blown thin. Generally, the low-temperature side is blown thick due to the fast cooling of laminated glass.
3. To avoid deformation, the material drop temperature and the actual effect temperature of the pickle bottle are too high, and the water bottle that is slipped by the forming die is not shaped. The middle and late stages usually collapse, and sometimes the bottom of the bottle is still soft and will be imprinted with transport belt marks and then the bottom of the bottle is uneven.
Pickle bottle production technology
1. Generally speaking, the beginning of manufacturing is to carry out the gradual production and processing of raw materials. Generally speaking, pickle bottles are made of laminated glass, which does not contain carbon in the right and wrong crystals. Nowadays, more and more are used to use quartz sand and boro sand. There are also boric acid, barite powder, barium oxide and its limestone, marble, potassium nitrate, and other raw materials to be solved, and a small amount of auxiliary raw materials are added in the entire process of production and processing.
2. Carry out the corresponding material preparation. Then further melting. The laminated glass is heated at continuous high temperatures in the pool kiln or pool furnace, paying attention to maintaining a uniform, no bubbles, and liquid glass that meets the forming requirements. Generally speaking, the heat treatment process of pickle bottles is mainly based on heat treatment, heat treatment process, and other production processes. Causes stress field, phase separation, or crystallization inside laminated glass.